Removing and installing cylinder head
Removing and installing cylinder head
Notes:
-
◆ Cylinder heads with cracks between the valve seats can continue to be used without shortening their useful lives provided the cracks are only slight - max. 0.5 mm wide.
-
◆ The entire coolant is to be renewed on replacing cylinder head or cylinder head gasket.
-
◆ Reworking diesel cylinder heads is not permitted.
-
◆ When installing a replacement cylinder head with the camshaft fitted, the contact faces between the bucket tappet and the cam slideway must be oiled after installing the head.
-
◆ The plastic pads supplied for protection of the open valves are not to be removed until immediately prior to fitting cylinder head.
-
◆ Heed current information on the use of sealants.
=> Parts List
-
◆ Removing and installing tandem pump:
=> Fuel supply - Diesel engines; Repair Group 20
|