|
Servicing charge-air system with turbocharger
Rules for cleanliness
Pay careful attention to the following rules for cleanliness when working on turbocharger:
-
◆ Carefully clean all joints and adjacent areas before disconnecting.
-
◆ Place parts removed on a clean surface and cover them over. Do not use fluffy cloths.
-
◆ Carefully cover or seal opened components if repairs are not to be performed immediately.
-
◆ Only install clean components:
Do not remove replacement parts from wrapping until immediately prior to installation.
Do not use parts that have been stored loose (e.g. in tool boxes).
-
◆ When system is open:
Do not work with compressed air if at all possible.
Do not move vehicle unless absolutely necessary.
| 
