Audi Workshop Service and Repair Manuals

• Circlip
• 10 Nm
• ◆ Install with locking fluid D 000 600 A2

=> Parts List

• Turbocharger
• ◆ Testing onwards
• ◆ Removing and installing
  => Page 21-43
• Gasket
• ◆ Replace
• Catalytic converter

• 25 Nm
• ◆ Replace
• Sealing ring
• ◆ Replace
• Screw connection
• ◆ Tighten to 23 Nm on Garret version
• ◆ Tighten to 40 Nm on KKK version
• to oil filter bracket
• 10 Nm
• Oil supply pipe
• ◆ Tighten union nut to 25 Nm
• Exhaust manifold

• 30 Nm
• ◆ Replace
• ◆ Coat threads and bolt head seating surface with hot bolt paste "G 052 112 A3"

=> Parts List

• Intake pipe
• ◆ Removing and installing
  => Page 15-11
• Gasket
• ◆ Replace
• ◆ Note installation position
• 25 Nm
• Gasket
• ◆ Replace
• ◆ Note installation position
• Shim
• 25 Nm
• ◆ Replace

• Heat shield
• 25 Nm
• Gasket
• ◆ Replace
• Oil return pipe
• ◆ To cylinder block
• Sealing ring
• ◆ Replace
• Banjo bolt - 30 Nm
• 10 Nm
• Hose
• ◆ From solenoid valve for boost pressure limitation -N75
• Pressure unit
• ◆ For boost pressure control