audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing viscous fan > < Removing and installing coolant pipes (top left and bottom left)

A4 Mk1

Removing and installing coolant pipe (right-side)
Removing and installing coolant pipe (right-side)
   
Removing
–  Drain coolant → Chapter.
–  Remove oil filter bracket → Chapter.
–  Remove bolts -2- and -3-.
–  Press coolant pipe -1- to rear and detach.
Installing
Installation is carried out in the reverse order; note the following:
  Note
t  Renew self-locking nuts.
t  Renew seals and O-rings.
–  Clean and smoothen sealing surface for O-ring.
–  Lubricate O-ring with coolant and slide onto coolant pipe.
–  Slide coolant pipe into bores in cylinder block and cylinder head.
–  Install oil filter bracket → Chapter.
–  Fill up with coolant → Anchor.
Tightening torques
  A19-0090
ComponentNm
Coolant pipe (right-side) to:Cylinder block10
 Cylinder head10

   

Removing and installing viscous fan > < Removing and installing coolant pipes (top left and bottom left)