Audi Workshop Service and Repair Manuals

Removing and installing viscous fan Special tools and workshop equipment required

t  Open-end spanner -3312-

Removing l  Lock carrier must be in service position → Chapter. –  Detach caps on engine cover panel. –  Unbolt and remove engine cover panel -arrows-.

–  Unscrew viscous fan (32 mm).

–  Unscrew bolt -arrow- from front and remove air duct for viscous fan. –  Detach viscous fan with air duct.

Installing Installation is carried out in the reverse order; note the following: –  Secure viscous fan.

Tightening torque for viscous fan		Nm
Torque wrench -V.A.G 1331- together with open-end spanner -3312-		37
Torque wrench -V.A.G 1331- without open-end spanner -3312-		70