audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Check fuel pump delivery rate > < Removing and installing fuel delivery unit
6-cylinder Engine (2-valve) Mechanics
Removing and installing parts of fuel supply system
Test fuel pump
  • ● Battery voltage OK.
  • ‒ Fuse 28 in fuse carrier OK
  • ‒ Check voltage supply to terminal 28 =>
    Workshop Manual
    Audi A4 1995 ä
    MPI Injection and ignition system
    Edition 11.94
    Engine code AAH,
    Repair Group 24.
  • ‒ Power supply OK.
 
V96-0816
  • ‒ Remove cover for fuel gauge and fuel pump from below rear right of rear boot trim.
  • ‒ Pull off connectors for fuel pump and fuel gauge.
  • ‒ Supply voltage to fuel pump via final control diagnosis function 03.
  • ‒ → Check voltage at connector with voltage meter between terminal 1 (green) and 4 (brown).

Specified value: Approx. battery voltage

 
V20-1068
  • ‒ If specified value is attained, reattach connector.
  • ‒ → Check pipe between connector (on exterior of housing), electric connection and fuel pump with ohmmeter for through flow.
  • ‒ Through flow OK, replace fuel pump .
  • ‒ Install cover for fuel gauge and fuel pump from below rear boot trim.

Check fuel pump delivery rate > < Removing and installing fuel delivery unit