audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator fan 2 V177 (front) > < Removing and installing radiator

A4 Mk1

Removing and installing radiator fanV7 (right side)
Removing and installing radiator fan -V7- (right side)
   
Removing
  Note
All cable ties which are released or cut open when removing must be fitted in the same position when installing.
–  Remove noise insulation -arrows-.
–  Remove front bumper → Rep. Gr.63.
–  Move lock carrier to service position → Rep. Gr.50.
  A10-0018
–  Remove cover -arrow- at power steering fluid reservoir.
  A10-0266
–  Remove all electrical connectors from the bracket -arrows-.
–  Unplug black connector and move wiring to radiator fan -V7- clear.
  A10-0228
–  Remove bolt -1-.
–  Turn radiator fan in direction of -arrow- and remove.
Installing
Installation is carried out in the reverse order; note the following:
  Note
Fit all cable ties in the original positions when installing.
–  Install lock carrier with attachments → Rep. Gr.50.
–  Install front bumper → Rep. Gr.63.
Tightening torque
  A10-0199
ComponentNm
Radiator fan -V7- to lock carrier5

   

Removing and installing radiator fan 2 V177 (front) > < Removing and installing radiator