Procedure following interruption of voltage supply
Motronic injection and ignition system (6 cyl. turbo)
Servicing Motronic injection system
Procedure following interruption of voltage supply
Note:
In the first learning phase, during the basic setting operation for the engine, slightly irregular idling and slight jolting during driving are possible.
Special tools and workshop equipment required
◆ VAS 5051 with VAS 5051/1
or
◆ V.A.G 1551 with V.A.G 1551/3 A
Procedure
Perform the following operations after a voltage interruption:
‒ Interrogate fault memory and erase, if necessary .
‒ Perform adaptation of throttle valve control unit -J338 => Page 24-148.