audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Vehicles with 4-cyl. engines > < Checking delivery pressure of vane pump
Running gear, Front-wheel drive and four-wheel drive
Checking delivery pressure of vane pump
General information

The following information does not apply to the 6-cyl. 5-valve turbo engine (bi-turbo).

Notes:

Pay attention to the following to avoid damaging pump:

  • ◆ Cut-off valve of pressure gauge must not remain closed for more than 10 seconds during this test.
  • ◆ Start engine without pressing accelerator and allow it to idle.
  • ◆ Take pump pressure reading at idling speed immediately after starting (have second mechanic take reading if necessary).
  • ◆ Maximum pressure displayed is definitive, as pressure decreases in the course of the test.

Vehicles with 4-cyl. engines

Vehicles with 6-cyl. engines except 5-valve turbo (bi-turbo)

Vehicles with 6-cyl. 5-valve turbo engine (bi-turbo) => Page 48-99

Vehicles with 4-cyl. engines > < Checking delivery pressure of vane pump