audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear light trim > < Removing and installing rear light

A4 Mk1

Removing and installing bulb carrier
Removing and installing bulb carrier
   
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position “0”.
–  Unscrew retaining clips -1- and -3-.
–  Fold trim -2- to side -arrow-.
  A94-10371
–  Unplug electrical connector -3-.
–  Press catch -1- upwards and release retaining clip -arrow-.
–  Detach bulb carrier -2- in direction of passenger compartment out of rear light.
–  Detach bulbs from bulb holders.
  A94-10373
–  Detach bulb holder -1- for tail light (turn bulb holder anti-clockwise -arrow-).
–  Take bulb out of bulb holder.
Installing
Install in reverse order.
  A94-10374

Removing and installing rear light trim > < Removing and installing rear light