Audi Workshop Service and Repair Manuals

The vehicle parameter values are checked each time the customer service main menu is entered and the
WIRING, DRIVE TST, SYS. TEST, END.

Display:

• ‒ If the selection is confirmed with the "ENTER" key, the program continues with the relevant menu item.

• ‒ If the selection is not confirmed with the "ENTER" key, the following instruction appears:

Display:

• ‒ Confirm the display OK with the "ENTER" key.

Note:

If there are no specified parameters for a menu item, this menu item is deactivated and marked with a * symbol.

In this case, the cursor is positioned on the menu item which, when executed, will set the missing parameters.

Display:

• ‒ Confirm the selection with the "ENTER" key and then proceed with the wheel calibration .