A4 Mk2
Exploded view - side window (high-gloss package) |
1 - | Side window |
q | Removing → Chapter |
q | Note differing distances between adhesive bead and edge of window. |
q | When installing, start by positioning bottom of window on side panel. |
q | Press window down as far as stop -arrow- and into window opening. |
q | After the setting time, fit roof trim strip and D-pillar trim. |
2 - | Roof trim strip at D-pillar |
q | Trim panel for C-pillar removed |
q | To remove, start by carefully prising out of retaining clips at bottom of C-pillar. |
q | Then prise out of retaining clips at D-pillar and pull downwards out of roof trim strip. |
3 - | Trim panel for C-pillar |
q | To remove, pull trim panel out of clips -4- towards rear. |
q | When installing, start by positioning trim at roof trim strip (top) and then press completely into clips -4-. |
q | Dimension a = 0.5 ± 0.1 mm |
4 - | Retaining clips |
q | Riveted onto C-pillar |