Renewing electric height adjuster on seats with upper section laser-welded to seat rail (new version) |
Note t
| The new pivot stud, nut and plastic toothed segment are supplied together with the height adjuster replacement part. |
t
| The new micro-encapsulated bolts for securing the triangular holder to the height adjustment mechanism are supplied with the height adjuster replacement part. |
–
| Move seat forwards as far as possible. |
–
| Loosen pivot stud, nut and drive lever for height adjuster mechanism. |
–
| Unscrew the two micro-encapsulated bolts between triangular holder and height adjuster mechanism. |
–
| Remove height adjuster mechanism. |
–
| The white plastic toothed segment must be renewed if it is damaged. |
–
| Clean the threads on the height adjuster mechanism. |
–
| Install height adjuster mechanism in reverse order of removal. |
Note Always clean threaded holes for bolts (using e.g. a tap). |
|
|
|