A4 Mk2
|
|
|
1 - | Hook |
2 - | Bowden cable for four-way lumbar support |
3 - | Four-way lumbar support |
t | Removing: |
– | Remove seat → Chapter. |
– | Attach seat repair stand -VAS 6136- to engine and gearbox support -VAS 6095-. |
– | Attach front seat to seat repair stand -VAS 6136-. |
– | Remove backrest cover panel → Chapter. |
– | Disengage bracket -6- (bottom) from backrest frame -7- (left and right). |
– | Disengage four-way lumbar support -3- (top) from retainers -9- (2x) on left and right. |
– | Disengage Bowden cable for four-way lumbar support -8- from hook -1-. |
– | Disengage Bowden cable for adjusting height of four-way lumbar support -2- at retaining pin -4- and guide roller -5-. |
– | Take out four-way lumbar support -3-. |
t | Installing: |
Install in reverse order of removal. |
4 - | Retaining pin |
5 - | Guide roller |
6 - | Bracket |
7 - | Backrest frame |
8 - | Bowden cable for adjusting height of four-way lumbar support |
9 - | Retainers (2x) |