A4 Mk2
Dismantling and assembling pinion shaft |
Special tools and workshop equipment required |
t | Thrust plate -VW 401- |
t | Thrust plate -VW 402- |
t | Press tool -VW 407- |
t | Press tool -VW 412- |
t | Tube -VW 415 A- |
t | Support rails -VW 457- |
t | Multi-purpose tool -VW 771- |
t | Tube -32 - 109- |
t | Drift sleeve -40 - 21- |
t | Punch -3013- |
t | Tube for wheel bearing -3345- |
t | Adapter -V.A.G 1582/7- |
|
|
|
|
|
Note
|
|
|
|
|
Circlip thickness (mm) | ||
1.50 | 1.90 | 2.30 |
1.55 | 1.95 | 2.35 |
1.60 | 2.00 | 2.40 |
1.65 | 2.05 | 2.45 |
1.70 | 2.10 | 2.50 |
1.75 | 2.15 | 2.55 |
1.80 | 2.20 | 2.60 |
1.85 | 2.25 |