Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Checking cooling system for leaks >
< Removing and installing radiator fan V7 (left side)
A4 Mk2
Power unit
8-cylinder direct petrol injection engine (4.2 ltr. 4-valve RS 4), mechanics
Engine cooling / Cooling system
Removing and installing radiator fan 2 V177 (right side)
Removing and installing radiator fan 2V177 (right side)
Removing and installing radiator fan 2 -V177- (right side)
Removing
Note
All cable ties which are released or cut open when removing must be fitted in the same position when installing.
–
Move lock carrier to service position
→ Rep. Gr.50
.
–
Unplug electrical connector
-arrow-
.
–
Move wiring harness going to radiator fan clear.
–
Remove bolt
-1-
.
–
Turn radiator fan in direction of
-arrow-
and remove.
Installing
Installation is carried out in the reverse order; note the following:
Note
Fit all cable ties in the original positions when installing.
–
Install lock carrier with attachments
→ Rep. Gr.50
.
–
Install bumper cover (front)
→ Rep. Gr.63
.
Tightening torque
Component
Nm
Radiator fan to lock carrier
9
Power unit
8-cylinder direct petrol injection engine (4.2 ltr. 4-valve RS 4), mechanics
Engine cooling / Cooling system
Removing and installing radiator fan 2 V177 (right side)
Checking cooling system for leaks >
< Removing and installing radiator fan V7 (left side)