Audi Workshop Service and Repair Manuals > A4 Mk2 > Power unit | 8-cylinder engine (4.2 ltr. 5-valve with timing chains), mechanics | Engine cooling | Removing and installing parts of cooling system | Removing and installing radiator fan 2 V177 (right side)

Removing and installing radiator fan 2V177 (right side)

Removing and installing radiator fan 2 -V177- (right side)

Removing

Note

All cable ties which are released or cut open when removing must be fitted in the same position when installing.

–	Move lock carrier to service position → Chapter.

–	Unplug electrical connector -arrow-.

–	Lay wiring harness to radiator fan clear.

–	Remove bolt -1-.

–	Turn radiator fan in direction of -arrow- and remove.

Installing

Installation is carried out in the reverse order; note the following:

Note

Fit all cable ties in the original positions when installing.

–	Install lock carrier with attachments → Rep. Gr.50.

–	Allow stop for torque reaction support to rest on rubber buffer for torque reaction support under its own weight and tighten bolts -arrows-.

–	Install bumper cover (front) → Rep. Gr.63.

–	Check headlight adjustment → Booklet803 or → Booklet805.

Tightening torques

Component	Nm
Radiator fan to lock carrier	10
Stop for torque reaction support to lock carrier	28

Audi Workshop Service and Repair Manuals