audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing ashtray light (front) > < Renewing bulb for interior light/reading light (rear)

A4 Mk2

Removing and installing glove box light
Removing and installing glove box light
   
Removing
–  Turn light switch to position “0”.
–  Using a flat-head screwdriver, press in retaining tab -1- and pry out glove box light -2-.
–  Unplug electrical connector -3-.
–  Take bulb (12 V, 5 W) on reverse side of glove box light out of bulb holder.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert glove box light in opening and engage on opposite side.
  A96-0462

Removing and installing ashtray light (front) > < Renewing bulb for interior light/reading light (rear)