audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing adapter cable for gas discharge lamp control unit > < Removing and installing headlight range control motor

A4 Mk2

Removing and installing control unit for gas discharge lamp
Removing and installing control unit for gas discharge lamp
   
Removing
  WARNING
High voltage! Danger to life!
Safety precautions when handling gas discharge lamps → Electrical system; General information; Rep. Gr.94.
–  Remove headlight → Chapter.
–  Unscrew bolts -arrows-.
–  Detach control unit -1- from housing cover for headlight housing.
  A94-10135
–  Unplug electrical connectors -1- and -2-.
Installing
Installation is carried out in the reverse order; note the following:
–  Check gasket between control unit for gas discharge lamp and headlight housing.
–  Install headlight → Anchor.
–  Connect the battery. Additional steps required → Anchor.
Tightening torque
  A94-10136
ComponentNm
Control unit to headlight1

   

Removing and installing adapter cable for gas discharge lamp control unit > < Removing and installing headlight range control motor