audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing solenoid for headlight screen adjustment > < Renewing gas discharge lamp

A4 Mk2

Renewing bulb for main beam headlights
Renewing bulb for main beam headlights
   
Removing
  WARNING
High voltage! Danger to life!
Safety precautions when handling gas discharge lamps → Electrical system; General information; Rep. Gr.94.
–  Remove headlight → Chapter.
–  Unscrew bolts -1- and -2-.
–  Release retaining clip -3- in direction of -arrow- and detach housing cover from headlight housing.
  A94-10102
–  Turn bulb -1- clockwise -arrow- and pull out of headlight housing.
–  Unplug electrical connector -2-.
Installing
Installation is carried out in the reverse order; note the following:
–  Fit new bulb in housing; do not touch the glass part of the bulb with bare hands.
–  Secure bulb by turning in anti-clockwise direction.
–  Secure housing cover with bolts and retaining clip.
–  Install headlight → Anchor.
–  Connect the battery. Additional steps required → Anchor.
  A94-10144

Removing and installing solenoid for headlight screen adjustment > < Renewing gas discharge lamp