Audi Workshop Service and Repair Manuals > A4 Mk2 > Vehicle electrics | Electrical system | Lights, lamps, switches outside | High-level brake light - vehicles from 11.2004 | Removing and installing high-level brake light (Saloon)

Removing and installing high-level brake light (saloon)

Removing

Note

High-level brake light is accessible from luggage compartment through opening beneath rear shelf.

–	Do not press brake pedal.

–	Unplug electrical connector -1- at high-level brake light -2-.

–	Release retaining clips -3- in direction of -arrow-.

–	Pull high-level brake light downwards out of opening.

Installing

Installation is carried out in the reverse order; note the following:

Note

If the LEDs are defective, the complete high-level brake light must be renewed.

Audi Workshop Service and Repair Manuals