Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing steering column electronics control unit J527 >
< Removing and installing return ring with slip ring
A4 Mk2
Vehicle electrics
Electrical system
Lights, lamps, switches outside
Steering column switch module
Removing and installing steering angle sender G85
Removing and installing steering angle senderG85
Removing and installing steering angle sender -G85-
Note
If the steering angle sender -G85- is renewed, it must be calibrated
→ Vehicle diagnosis, testing and information system VAS 5051
.
Removing
–
Remove return ring with slip ring
→ Chapter
.
–
Pull off steering angle sender -G85-
-item 1-
-arrow-
.
Installing
Install in reverse order.
–
Perform calibration of steering angle sender -G85- in “Guided Functions” after renewing steering angle sender -G85-
→ Vehicle diagnosis, testing and information system VAS 5051
.
Vehicle electrics
Electrical system
Lights, lamps, switches outside
Steering column switch module
Removing and installing steering angle sender G85
Removing and installing steering column electronics control unit J527 >
< Removing and installing return ring with slip ring