Audi Workshop Service and Repair Manuals > A4 Mk3 > Body | General body repairs, exterior | Bumper | Bumper (front)

Removing and installing impact bar

Removing

Note

Re-attach all cable ties at the same locations when re-installing.

–	Remove bumper cover (front) → Chapter.

–	Unplug electrical connector -4- at horns and move clear electrical wiring harness -3- at horn bracket.

–	Move clear washer hose for washer jet by cutting cable tie -1-.

–	Unscrew bolts -arrows- and detach spacer -2- for bumper cover.

–	Take impact bar -5- out of mountings.

Note

If impact bar cannot be removed from mountings easily, it must be levered out.

Installing

l	Tightening torque → Chapter

Installation is carried out in the reverse order; note the following:

–	Install bumper cover (front) → Chapter.

Audi Workshop Service and Repair Manuals