Note t
| Panels that have been bonded on are damaged irreparably when removed and cannot be re-installed (i.e. they must be renewed). |
t
| Remove any remaining adhesive from the body. |
t
| Clean bonding surfaces on body with cleaning solution -D 009 401 04-. |
t
| The bonding surfaces must be free of dust and grease. |
t
| Before bonding, heat bonding surfaces and panels to approx. 40° C. |
t
| When fitting panels, make sure that the position of the panel is matched exactly to the contour of the body (it is not possible to adjust the position after the panel makes contact). |
t
| After installing, press on covers again with roller -3356-. |
|
|
|