audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing mounting bracket > < Removing and installing door lock

A4 Mk3

Removing and installing operating cable for door opener
Removing and installing operating cable for door opener
Removing
–  Remove lock cylinder → Chapter.
–  Remove door trim → Rep. gr.70.
–  Remove cover for inner door panel → Chapter.
–  Remove cover for door lock → Chapter.
   
–  Remove bolts -arrows-.
–  Press door lock -1- to one side and unplug electrical connector -2- if necessary.
  A57-10324
–  Disengage operating cable -3- from door lock support bracket -2--arrow A-.
–  Turn nipple -1- 90° in direction of -arrow B- and take it out of door opener release lever -4-.
  A57-10241
Installing
l  Tightening torque → Chapter
Installation is carried out in the reverse order; note the following:
–  Insert nipple -2- in door opener release lever -3--bottom arrow-.
–  Turn nipple 90° -top arrow- and press operating cable into cable support bracket on door lock -1- until it engages audibly.
–  Install cover for door lock → Chapter.
–  Install cover for inner door panel → Chapter.
–  Install door trim → Rep. gr.70.
–  Install lock cylinder → Chapter.
  A57-10117

Removing and installing mounting bracket > < Removing and installing door lock