Audi Workshop Service and Repair Manuals > A4 Mk3 > Body | General body repairs, interior | Passenger protection | Seat belts | Removing and installing outer belt end fitting (rear)

Removing and installing outer belt end fitting (rear)

Note

Removal and installation are identical on the left and right.

Removing

–	Remove seat bench → Chapter.

–	Remove bolt -1- at belt end fitting -2-.

Installing

Installation is carried out in the reverse order; note the following:

–	If components of the belt system are removed following an accident, renew the securing bolts for the belt system.

l	Recess in attachment surface for belt end fitting must be positioned above lugs on floor panel.

Tightening torque → Chapter

Audi Workshop Service and Repair Manuals