| –
| Remove seat pan cover and padding → Chapter. |
| –
| Cut off electrical wire -3- directly at old seat heating element -2-. |
| –
| Cut through connecting webs -arrows-. |
| –
| Carefully release seat heating elements -D- and -E- from adhesive bond and detach. |
Note | t
| Take care not to damage spacers. |
| t
| Old seat heating elements -A, B, C- remain on padding; new seat heating element is bonded over old element. |
| –
| Align new seat heating element on padding. |
Caution | t
| Take care to attach the new seat heating element in such a way that it covers the old seat heating element exactly. |
| t
| Detach protective foil from areas of heating element in bonding sequence. |
| t
| When detaching protective foil, take care not to damage heating element and avoid creases when bonding. |
|
| –
| Bond individual areas of heating element in the sequence -A, B, C, D, E-. |
| –
| Route wiring leading to individual heating zones in bottoms of openings -arrows-. |
| –
| Pull wire -3- through slit in padding -1-. |
| Perform remaining installation in reverse order of removal. |
|
|
|
