audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing mid-range loudspeaker trim > < Door trim (front)

A4 Mk3

Exploded view of door trim
   
Exploded view of door trim
  Note
Illustration shows door trim on driver side.
1 - Entry light
q   Removing and installing → Electrical system; Rep. gr.96
2 - Bolt
q   For armrest
q   6x
q   1.2 Nm
3 - Active/passive reflectors
q   Depending on equipment version
4 - Interior monitoring switch -E183- / alarm system off switch -E217-
q   Removing and installing → Electrical system; Rep. gr.96
5 - Door trim
q   Removing and installing → Chapter
q   If door trim is renewed, hole for sleeve -item 9- must be drilled additionally based on old door trim
6 - Trim panel
q   Removing and installing → Chapter
7 - Clip
q   3x
q   Press into door trim
8 - Clip
q   With seal
q   For door trim
q   7x
  WARNING
t  Make sure that the door is properly sealed when it is installed; otherwise the crash sensor (pressure sensor) may not function correctly.
t  The retaining clips for the door trim provide a seal for the system. If necessary, renew retaining clips for door trim.
9 - Sleeve
q   For central locking deadlock function warning lamp -SAFE- -K133-
q   Driver's door only
q   Removing and installing central locking deadlock function warning lamp -SAFE- -K133- → Electrical system; Rep. gr.96
q   If door trim is renewed, hole for sleeve must be drilled additionally based on old door trim
10 - Bolt
q   For door trim
q   2.5 Nm
11 - Bolt
q   For interior door handle
q   6x
q   1.2 Nm
12 - Trim
q   For window frame
q   Removing and installing → Chapter
13 - Interior door handle
q   Removing and installing → Chapter
14 - Interior locking button
q   Driver side: driver side interior locking button for central locking system -E308-
q   Passenger side: front passenger side interior locking button for central locking system -E309-
q   Removing and installing → Electrical system; Rep. gr.96
15 - Loudspeaker trim
q   For treble loudspeaker
q   Removing and installing → Chapter
16 - Button for lane change assist -E530-
q   Removing and installing → Electrical system; Rep. gr.96
17 - Bolt
q   For door trim
q   2.5 Nm
18 - Trim
q   For rear lid remote release switch -E188-
q   Driver's door only
q   Removing and installing → Chapter
19 - Rear lid remote release switch -E188-
q   Removing and installing → Electrical system; Rep. gr.96
20 - Switch trim
q   For driver seat memory operating unit -E97-
q   Removing and installing → Chapter
21 - Driver seat memory operating unit -E97-
q   Removing and installing → Electrical system; Rep. gr.96
22 - Loudspeaker trim
q   For mid-range loudspeaker
q   Removing and installing → Chapter
23 - Door puller
q   With switch mounting
q   Removing and installing → Chapter
24 - Bolt
q   For door trim
q   2.5 Nm
25 - Symbol trim
26 - Mirror adjustment switch -E43-
q   Equipment version: Adjustment switch for mirror with fold-in feature -E168-
q   Removing and installing → Electrical system; Rep. gr.96
27 - Trim
q   For armrest
q   Removing and installing → Chapter
28 - Window regulator switch
q   Driver side: operating unit for window regulator in driver door -E512-
q   Passenger side: window regulator switch in front passenger door -E107-
q   Removing and installing → Electrical system; Rep. gr.96
29 - Bolt
q   For door trim
q   2.5 Nm
30 - Armrest
q   Removing and installing → Chapter
31 - Bolt
q   For door puller
q   5x
q   1.2 Nm
32 - Bolt
q   For door trim
q   2.5 Nm

   

Removing and installing mid-range loudspeaker trim > < Door trim (front)