audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing brake fluid reservoir > < Brake servo/ brake master cylinder - exploded view

A4 Mk3

Removing and installing cover for brake fluid reservoir
Removing and installing cover for brake fluid reservoir
Not installed in all vehicles
The cover for the brake fluid reservoir has an aperture on the left side for checking the brake fluid level. To avoid later damage, make sure no brake fluid is allowed to penetrate between the brake fluid reservoir and the cover for the brake fluid reservoir.
Removing
–  Remove plenum chamber cover → Rep. gr.50.
–  Remove bolt -4-.
   

–  Remove cover for brake fluid reservoir from vehicle.
Installing
–  Fit cover for brake fluid reservoir over brake fluid reservoir.
–  Screw in and tighten bolt -4-.
   

–  Install plenum chamber cover → Rep. gr.50.
   

Removing and installing brake fluid reservoir > < Brake servo/ brake master cylinder - exploded view