audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing right temperature flap control motorV159 > < Removing and installing right mounting plate with control motors V109 and V111

A4 Mk3

Dismantling and assembling right mounting plate with control motors V109 and V111
Dismantling and assembling right mounting plate with control motors -V109- and -V111-
–  Removing mounting plate with control motors -V109- and -V111- → Chapter
  Note
t  The mounting plate with the right footwell flap control motor -V109- and the right centre vent control motor -V111- is only fitted on vehicles with an air conditioner of the „Deluxe“ type.
t  At present all the control motors on this vehicle are identical. During basic setting, control motor assignment and adaption are implemented on the basis of the arrangement in the series connection of the wiring. If the sequence is not as specified, the matching of the control motors and thus flap control will not be correct → Chapter (block diagram of air conditioner control motors).
t  The shaft of the control motors has no stop. The shaft of these control motors can thus be inserted in any position in the cam plates.
t  Different versions of the levers and connecting elements are fitted at the air conditioning unit depending on the production period → Chapter and → Electronic parts catalogue.
   
1 - Bolt
2 - Right centre vent control motor -V111-
3 - Mounting plate
4 - Right footwell flap control motor -V109-
5 - Connecting rod
q   To flap for right centre vent
6 - Connecting rod
q   To flap for right dash panel vent
7 - Actuating arm
8 - Connecting rod
q   To flap for rear right footwell vent
9 - Connecting rod
q   To flap for front right footwell vent
10 - Cam plate
q   At right centre vent control motor -V111-
11 - Actuating arm
12 - Actuating arm
13 - Cam plate
q   At right footwell flap control motor -V109-
14 - Stop for cam plate

   

Removing and installing right temperature flap control motorV159 > < Removing and installing right mounting plate with control motors V109 and V111