A4 Mk3
Exploded view - ATF cooler, ATF lines and in-line ATF filter - vehicles with 8-cyl. engine |
1 - | ATF cooler |
q | Integrated in radiator for engine coolant |
q | Removing and installing → Rep. gr.19 |
2 - | O-ring |
q | Renew |
q | Lightly lubricate with ATF before inserting |
3 - | ATF pipe/hose assembly (supply) |
q | First push in ATF pipe/hose assembly with new O-rings by hand as far as stop |
q | Cleaning → Chapter |
4 - | Bolt |
q | 5 Nm |
5 - | Bolt |
q | 9 Nm |
6 - | ATF line (supply) |
q | First push in ATF pipe/hose assemblies with new O-rings by hand as far as stop |
q | Cleaning → Chapter |
7 - | Bolt |
q | 9 Nm |
8 - | Retaining clip |
q | Press onto connection and then pull to check that retaining clip has engaged properly |
9 - | O-ring |
q | Cannot be renewed at present. ATF line must be renewed if leakage occurs. |
10 - | In-line ATF filter |
q | → Chapter „Removing and installing in-line ATF filter“ |
11 - | Bolts |
q | 23 Nm |
12 - | Bolt |
q | 20 Nm |
13 - | O-rings |
q | Renew |
q | Lightly lubricate with ATF before inserting |
14 - | Bolt |
q | Secures ATF line together with bracket for exhaust system at gearbox |
q | 23 Nm |
15 - | O-ring |
q | Cannot be renewed at present. ATF line must be renewed if leakage occurs. |
16 - | Retaining clip |
q | Press onto connection and then pull to check that retaining clip has engaged properly |
17 - | ATF line (return) |
q | Removing and installing → Chapter |
q | Cleaning → Chapter |
18 - | Nut |
q | 9 Nm |
19 - | O-ring |
q | Cannot be renewed at present. ATF line must be renewed if leakage occurs. |
20 - | ATF pipe/hose assembly (return) |
q | Removing and installing → Chapter |
q | Cleaning → Chapter |
21 - | Retaining clip |
q | Press onto connection and then pull to check that retaining clip has engaged properly |
22 - | Bolt |
q | 5 Nm |
23 - | O-ring |
q | Renew |
q | Lightly lubricate with ATF before inserting |