audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing coolant temperature senderG62 > < Removing and installing pump for exhaust gas recirculation coolerV400

A4 Mk3

Removing and installing radiator outlet coolant temperature senderG83
Removing and installing radiator outlet coolant temperature sender -G83-
Removing
   
–  Remove engine cover panel -arrows-.
  A10-11050
–  Unplug electrical connector -1- and unscrew radiator outlet coolant temperature sender -G83--2-.
  WARNING
Hot steam/hot coolant can escape - risk of scalding.
t  The cooling system is under pressure when the engine is hot.
t  Cover filler cap on coolant expansion tank with a cloth and open carefully to dissipate pressure.
Installing
Install in reverse order. Note the following:
–  Top up coolant.
  A26-10679

Removing and installing coolant temperature senderG62 > < Removing and installing pump for exhaust gas recirculation coolerV400