audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing sump (top section) > < Sump (top section) - exploded view

A4 Mk3

Removing and installing valve for oil pressure controlN428
Removing and installing valve for oil pressure control -N428-
   
Removing
–  Remove front noise insulation -1- → Rep. gr.66.
  A10-11071
–  Unplug electrical connector -1-.
  Note
Place a cloth underneath to catch escaping engine oil.
–  Unscrew bolt -2- and remove valve for oil pressure control -N428-.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Sump (top section) - exploded view“
  Note
Fit new O-ring.
–  Check oil level → Booklet811, → Booklet812 or → Booklet818.
–  Install front noise insulation → Rep. gr.66.
  A17-10629

Removing and installing sump (top section) > < Sump (top section) - exploded view