A4 Mk3
| Exploded view of electronic damping control |
| 1 - | Switch module for Charisma -E592- |
| q | Fitting location: switch module for Charisma -592- is fitted in dash panel |
| 2 - | Electronically controlled damping control unit -J250- |
| q | Removing and installing → Chapter „Removing and installing electronically controlled damping control unit -J250-“ |
| q | Fitting location: electronically controlled damping control unit -J250- is located behind luggage compartment side trim (right-side) |
| q | Reference position of suspension must be re-adapted if electronically controlled damping control unit -J250- is renewed → Chapter → Vehicle diagnostic, testing and information system VAS 5051 |
| q | If the reference position has been re-adapted on vehicles with lane departure warning, the lane departure warning control unit -J759- must be recalibrated → Chapter. |
| 3 - | Shock absorber with rear right shock absorber damper adjustment valve -N339- |
| q | → Chapter „Removing and installing shock absorber - front-wheel drive vehicles“ |
| q | → Chapter „Removing and installing shock absorber - four-wheel drive vehicles“ |
| 4 - | Rear left vehicle level sender -G76- and rear right vehicle level sender -G77- |
| q | Removing and installing → Chapter „Removing and installing vehicle level sender“ |
| q | If the rear left vehicle level sender -G76- and rear right vehicle level sender -G77- are removed and refitted or if the linkage is detached, the reference position must be re-adapted on vehicles with electronic damping control → Chapter → Vehicle diagnostic, testing and information system VAS 5051 |
| q | If the reference position has been re-adapted on vehicles with lane departure warning, the lane departure warning control unit -J759- must be recalibrated → Chapter. |
| q | On vehicles with automatic headlight range control, carry out basic adjustment of headlights → Rep. gr.94. |
| 5 - | Rear body acceleration sender -G343- |
| q | Removing and installing → Chapter „Removing and installing rear body acceleration sender -G343-“ |
| 6 - | Shock absorber with rear left shock absorber damper adjustment valve -N338- |
| q | → Chapter „Removing and installing shock absorber - front-wheel drive vehicles“ |
| q | → Chapter „Removing and installing shock absorber - four-wheel drive vehicles“ |
| 7 - | Front left body acceleration sender -G341- and front right body acceleration sender -G342- |
| q | Removing and installing → Chapter „Removing and installing front left body acceleration sender -G341- and front right body acceleration sender -G342-“ |
| 8 - | Shock absorber with front left shock absorber damper adjustment valve -N336- |
| q | Removing and installing suspension strut → Chapter „Removing and installing suspension strut with mounting bracket“ |
| q | Servicing suspension strut → Chapter „Servicing suspension strut and mounting bracket“ |
| 9 - | Front left vehicle level sender -G78- and front right vehicle level sender -G289- |
| q | Removing and installing → Chapter |
| q | If the front left vehicle level sender -G78- and front right vehicle level sender -G289- are removed and refitted or the linkage is detached, the reference position must be re-adapted on vehicles with electronic damping control → Chapter → Vehicle diagnostic, testing and information system VAS 5051 |
| q | If the reference position has been re-adapted on vehicles with lane departure warning, the lane departure warning control unit -J759- must be recalibrated → Chapter. |
| q | On vehicles with automatic headlight range control, carry out basic adjustment of headlights → Rep. gr.94. |
| 10 - | Shock absorber with front right shock absorber damper adjustment valve -N337- |
| q | Removing and installing suspension strut → Chapter „Removing and installing suspension strut with mounting bracket“ |
| q | Servicing suspension strut → Chapter „Servicing suspension strut and mounting bracket“ |
