A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Shifter A/T: Removal and Replacement
From VIN 8E_8A 002700
Shift Mechanism Assembly Overview
‹› Lubricate bearing areas and slide surfaces with polycarbamide grease (G 052 142 A2).
1
Rubber seal
2
Adapter
‹› Placed on shift mechanism function unit and attached with bolts => [ (Item 3) Bolt ]
3
Bolt
‹› 2 Nm
‹› Quantity: 4
4
Selector mechanism function unit
5
Shift lock solenoid (N110)
‹› Refer to => [ Shift Lock Solenoid ] See: Actuators and Solenoids - A/T/Shift Interlock Solenoid/Service and Repair
6
Retaining clip
‹› Secures selector lever cable on selector mechanism function unit