A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Clutch Pedal Assembly: Service and Repair
Pedal Assembly Component Overview
Pedal Assembly Component Overview
1
Mounting bracket
‹› Removing and installing, refer to => [ Clutch Master Cylinder ] See: Clutch Hydraulic System/Clutch Master Cylinder/Service and Repair
2
Mounting pin for clutch and brake pedal
3
Locking clip
4
Internal hex bolt - 25 Nm
5
Brake pedal
‹› Maintenance-free bearing; do not lubricate
6
Clutch Pedal Switch (F 36)
‹› May be installed just one time; must be replaced when removed
‹› Removing and installing, refer to => [ Clutch Pedal Switch ] See: Clutch Switch/Service and Repair/Clutch Pedal Switch
7
Internal hex bolt - 5 Nm
‹› To secure mounting pin for clutch pedal and brake pedal