A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Pulling in outer race for large taper roller bearing
-
Lightly lubricate bearing seat in housing.
-
Insert predetermined shim "S3" for drive pinion. Refer to => [ Adjustment Overview ] See: Adjustments.
The inscription "top" on pressure plate (3253/4) faces nut of insertion device
Pressing in small taper roller bearing outer race
-
Lightly lubricate the bearing seat in the housing.
-
The outer race must be attached with needle bearing drift (VW295) and thrust pad (30-205).
Pressing on small taper roller bearing inner race