A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
/Page-1324004.png)
Installation is carried out in reverse order. Note the following:
-
Replace O-ring between drive pinion bearing and flange.
-
Lightly oil O-ring before installing.
-
Pack space between sealing and dust lips half full with sealing grease (G 052 128 A1).
-
Lightly oil outer circumference of seal.
-
Drive in seal for drive shaft flange onto stop with drift ( 3026).
-
Drive shaft flange onto drive pinion until securing nut can be mounted.
