A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
/Page-1346002.png)
-
Install CV boot. The bead in the CV boot must engage in the joint piece groove.
-
Remove driveshaft from vise and clamp in joint piece.
-
Insert new sealing ring - arrow - from repair kit into the groove.
-
Install new cover on joint. The holes of the cover and joint must align.
-
Install clamp.
Observe note => [ Install clamp. ] See: Triple Roller Joint AAR 2600 i or 3300 i, Assembling.
