A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Constant Velocity Joint: Removal and Replacement
Triple Roller Joint AAR 2000 Outer CV Joint, Servicing
Triple Roller Joint AAR 2000 Outer CV Joint, Servicing
Disassembling outer CV joint
-
Secure drive axle with protective covers in vise clamp.
-
Remove clamp and slide boot back.
-
Screw Pressure Spindle (3207) with M 16/M 14 thread version into joint pins until CV joint is press off of drive axle.
-
Remove circlip
Outer CV joint, installing
-
Slide joint protective boot onto drive axle.
Protective boot and boot seat on drive axle must be free of grease.
-
Install new circlip
Circlip (snap ring) must be replaced.
-
Apply 50 g joint grease in inside of joint.
-
Before installing joint or triple roller star, splines - A - must be lightly coated with grease used in joint.