A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
/Page-1341005.png)
-
Check circlip for correct seating.
Circlip must be replaced
-
Apply 50 g joint grease in boot.
Make sure you do not damage the sealant bead.
-
Using bolts - arrows -, align protective boot and cap with bolt holes.
It must be aligned exactly because it cannot be aligned after driving on.
-
Drive off protective boot with cap using plastic hammer.
-
Clear away leaking sealing immediately.
-
Apply 30 g joint grease in CV joint through ball paths.
-
Grease seal contact surface - arrow -.
