A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Install the large needle bearing - 2 -.
-
Insert pinion shaft into hollow shaft - 3 -.
‹› The hollow shaft is assembled with the gear wheels and inner race/raper roller bearing.
-
Install the small needle bearing - 4 -.
-
Install the pinion outer race/double tapered roller bearing into the transmission without the shims.
-
Install the outer race/tapered roller bearing for the pinion/hollow shaft with shim "S4*" (1.01 mm thick) into the bearing housing.