A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
/Page-1383006.png)
‹› Mount the dial gauge extension - A - on the ridge in the transmission cover.
-
Set gauge (3 mm measuring range) to "0" with 1 mm pre-load.
-
Loosen the bolts on the transmission cover and turn the pinion.
-
Dial gauge must now display the following value for correctly selected adjustment shims:
‹› 0.09 to 0.18 mm
-
Tighten the transmission cover bolts to 35 Nm.
-
Remove the measuring tools.
-
Turn drive pinion with hollow shaft against hollow shaft 5 rotations in both directions to settle the tapered roller bearings.
Determining dimension "e "
‹› Dimension "e" is required to determine final shim thickness of "S3" and "S4".
-
Set adjustment rings of Universal Mandrel (VW 385/1 ) to the following values:
