A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Differential: Removal and Replacement
Self-Locking Center Differential Assembly Overview
Self-Locking Center Differential Assembly Overview
1
Center differential housing
‹› With or without vibration dampener, depending on version
‹› Removing and installing with transmission removed, refer to => [ Transmission, Assembly Sequence ] See: Service and
Repair/Overhaul/Transmission, Assembly Sequence
‹› Removing and installing with transmission installed, refer to => [ Self-Locking Center Differential, Transmission Installed ] See:
Overhaul/Differential, Manual Transaxle/Self-Locking Center Differential, Transmission Installed
2
Bolt, 10 Nm plus an additional 45° turn
‹› Quantity: 6
3
Spring
‹› Mounting onto the flange shaft in the center differential housing
‹› Do not interchange with the pressure spring => [ (Item 5) Spring ]
‹› Outer circumference: approximately 35 mm
4
self-locking center differential