A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
/Page-1391003.png)
‹› Refer to => [ Flange Shaft Seal and Ball Bearing, Replacing ] See: Seals and Gaskets/Service and Repair/02XA Transmission/Flange Shaft
Seal and Ball Bearing, Replacing
‹› Removing, refer to => [ Pressing Out Ball Bearing for Flange Shaft ] See: Seals and Gaskets/Service and Repair/02XA Transmission/Flange
Shaft Seal and Ball Bearing, Replacing
‹› Installing, refer to => [ Installing the Flange Shaft Ball Bearing ] See: Seals and Gaskets/Service and Repair/02XA Transmission/Flange Shaft
Seal and Ball Bearing, Replacing
12
Flange shaft with vibration damper
‹› Not present on all versions
‹› Only replace together
‹› Removing, refer to => [ Pressing out flange shaft ] See: Seals and Gaskets/Service and Repair/02XA Transmission/Flange Shaft Seal and Ball
Bearing, Replacing
‹› Installing, refer to => [ Pressing in flange shaft ] See: Seals and Gaskets/Service and Repair/02XA Transmission/Flange Shaft Seal and Ball
Bearing, Replacing
