Audi Workshop Service and Repair Manuals

Differential: Removal and Replacement
Differential Assembly Overview

Differential Assembly Overview

Differential, removing and installing => [ Differential ] See: Differential.

‹› Always replace both tapered roller bearings together as a set.

‹› Adjustments are required when replacing components marked with 1). List of adjustments => [ Adjustment Overview ] See: Overhaul/Final Drive,

Differential (02XA Transmission)/Adjustment Overview.

1

Transmission housing 1)

2

Adjustment shim "S2"

‹› Note thickness

‹› Adjustment overview, refer to => [ Adjustment Overview ] See: Overhaul/Final Drive, Differential (02XA Transmission)/Adjustment

Overview

3

Outer race for right tapered roller bearing 1)

‹› Pulling out, refer to => [ Pulling Outer Race for Right Tapered Roller Bearing out of Transmission Housing ] See: Overhaul/Final Drive,

Differential (02XA Transmission)/Differential

‹› Driving in, refer to => [ Right Tapered Roller Bearing Out Race, Driving Into Transmission Housing ] See: Overhaul/Final Drive, Differential

(02XA Transmission)/Differential