audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Transfer Case Cover|Service and Repair|Page 6024 > < Transfer Case Gear Oil Level, Checking|Page 6020
Page 1
background image

Transfer Case Cover: Service and Repair

Self-Locking Center Differential Cover

Special tools, testers and auxiliary items required

‹› Drip tray (V.A.G 1306)

‹› Protective glasses

Removing

‹› Transmission installed.

CAUTION!
Do not let engine run or tow vehicle without gear oil.

‹› General repair notes. Refer to => [ General Repair Information ] See: Automatic Transmission/Transaxle/Service and Repair/Procedures/General

Repair Information. 

‹› Rules of cleanliness for working on automatic transmissions. Refer to => [ Clean Working Conditions ] See: Automatic

Transmission/Transaxle/Service Precautions/Clean Working Conditions.

2.0L TFSI vehicles:

‹› Do not bend the flex joint in the front exhaust pipe more than 10°, otherwise it will be damaged.

-

Loosen bolts of front double clamp - arrows -.

-

To disconnect exhaust system, slide clamping sleeve toward rear. 

Vehicles with 4.2L MPI engine:

‹› To prevent damage, decoupling element in the front exhaust pipes must never be angled by more than 10°.

-

Disconnect exhaust system at double clamps - arrows -. 

Transfer Case Cover|Service and Repair|Page 6024 > < Transfer Case Gear Oil Level, Checking|Page 6020