A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Secure guide plate with knurled screws (VAS 5161/12 ).
-
Install adapter (T40012) with gasket by hand into respective spark plug thread and apply constant pressure.
‹› Minimum pressure: 6 bar positive pressure.
-
Install engaging device (VAS 5161/6) with installation fork (VAS 5161/5) into guide plate.
-
Push installation cartridge (VAS 5161/8) into guide plate.
-
Hook in pressure fork (VAS 5161/2) at engaging device and press down installation cartridge.
-
At the same time, turn knurled bolt of installation cartridge to the right, until the points engage in the valve keepers.
-
Lightly move knurled bolt back and forth, causing the valve keepers to be pressed apart and be captured in the installation cartridge.
-
Release pressure fork.
-
Take out installation cartridge.
-
Unfasten guide plate and turn it aside.
‹› Pressurized air hose remains connected.
-
Remove valve spring with valve spring plate.
-
Pull off valve stem oil seals using Valve Seal Removal Tool (3364).