A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-1441006.png)
‹› Observe the rules of cleanliness for working on automatic transmissions.
-
Place used oil collecting and extracting device ( V.A.G 1782) under separating point.
-
Remove bolt - arrow - and disconnect ATF-lines from transmission.
-
Tie ATF lines to side.
-
Remove nuts - 1 - and - 3 - accessible from below from exhaust pipe/exhaust manifold threaded connection.
‹› To improve clarity, the removed engine is shown.
