audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Battery, Testing With Midtronics Battery/Starting/Charging System Analyzer MCR340A|Page 7576 > < Battery, Testing With Midtronics Battery/Starting/Charging System Analyzer MCR340A|Page 7574
Page 2
background image

-

Follow (VAS 5051B) instructions and prompts. Depending on results, the following will be displayed:

‹› Battery is OK.

‹› Charge battery.

‹› Replace battery.

After battery test:

-

Tap button Go to.

-

Select function "Exit".

-

Where applicable, follow tester prompts regarding warranty requirements. 

-

Switch ignition off and disconnect tester from Data Link Connector (DLC).

-

If necessary, charge battery => [ Battery, Charging with Midtronics Diagnostic Conductance Charging Station INC-940 ] See: Battery Charging 

-

If necessary, replace battery.

‹› If battery is replaced, follow disposal regulations => [ Personal injury and environmental risk. ] See: Description and Operation/Battery. 

Battery, Testing With Midtronics Battery/Starting/Charging System Analyzer MCR340A|Page 7576 > < Battery, Testing With Midtronics Battery/Starting/Charging System Analyzer MCR340A|Page 7574